www.Titebond.comFranklin International MATERIAL SAFETY DATA SHEET MSDS Name: Titebond Clear Choice MSDS Number: 2931 Revision Date: 10/26/05 SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Name: Titebond Clear Choice CAS Number: none HMIS Hazard Rating: Health: 1 Fire: 1 Reactivity: 1 Company Identification: Franklin International 2020 Bruck Street Columbus OH 43207 Contact: Franklin Technical Services Telephone/Fax: (800) 877-4583 (614) 445-1493 Emergency Phone (24 Hour): Franklin Security (614) 445-1300 Chemtrec (24 Hour): (800) 424-9300 Chemtrec International: (703) 527-3887 Product Class elastomeric sealant Product Use: caulk Product Code: 2931 Division: Construction Adhesives & Sealants SECTION 2 - COMPOSITION AND INFORMATION ON INGREDIENTS Hazardous Ingredients CAS Number Percent Product contains no hazardous ingredients or they are below reportable levels. OSHA PELs & ACGIH TLVs are listed in Section 8 where applicable. SECTION 3 - HAZARD IDENTIFICATION EMERGENCY OVERVIEW: CAUTION: EYE AND SKIN IRRITANT. This product is a moisture curing paste which is yellow in the wet state and dries clear. Slippery in the wet state. ROUTES OF ENTRY: Ingestion: Yes Inhalation: Yes Skin: Yes Eye: Yes INHALATION: Breathing large amounts of vapor may be harmful. INGESTION: Ingestion is not a probable route of exposure. Harmful if swallowed. SKIN: Prolonged or repeated skin contact can cause irritation. EYE: Substance may cause moderate eye irritation. MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: Pre-existing skin disorders. CARCINOGENICITY: IARC: No NTP: No OSHA: No REPRODUCTIVE TOXICITY: None anticipated. TARGET ORGANS: Eyes and skin. SECTION 4 - FIRST AID MEASURES INHALATION: Remove to fresh air. If difficulty persists, seek medical attention. INGESTION: Call poison control center immediately. Follow their specific instructions. SKIN: Wash with soap and water. Contact a physician if irritation develops or persists. EYE: Hold eyelids apart and flush with plenty of water for at least 15 minutes. Seek medical attention. SECTION 5 - FIRE-FIGHTING MEASURES Flammability Class (OSHA) IIIB Flash Point: > 200.¯F Method not available Explosive Range: Not Applicable EXTINGUISHING MEDIA: Use alcohol foam, carbon dioxide, water spray, or ABC dry chemical when fighting fires involving this product. HAZARDOUS COMBUSTION PRODUCTS: Carbon monoxide, carbon dioxide and oxides of nitrogen may be released during combustion FIRE FIGHTING PROCEDURES: Wear a NIOSH approved self contained breathing apparatus. Wear appropriate personal protective equipment. SECTION 6 - ACCIDENTAL RELEASE MEASURES CONTAINMENT TECHNIQUES: Use suitable absorbent to contain the spill. CLEAN-UP: Spread absorbent over material and scrape up material/absorbent and place in an approved container. If product has dried scrape up and place in an approved container. SECTION 7 - HANDLING AND STORAGE HANDLING: Do not get material in eyes. Use only in well ventilated area. Avoid prolonged or repeated contact with the skin. STORAGE: Product is freeze thaw stable. Store between 41F (5C) and 77F (25C). Keep containers closed when not in use. Store in a cool, dry place. SECTION 8 - EXPOSURE CONTROLS AND PERSONAL PROTECTION Occupational Exposure Limits ACGIH TLV ACGIH TLV-C ACGIH STEL OSHA STEL OSHA PEL ENGINEERING CONTROLS: Good general ventilation should be sufficient for most conditions. OTHER: Facilities storing or utilizing any chemical should be equipped with an eyewash facility and a safety shower. RESPIRATORY PROTECTION: Respiratory protection is not expected to be necessary under normal use. Follow requirements for respiratory protection in OSHA 1910.134. EYE PROTECTION: Chemical splash goggles (ANSI Z87.1 or approved equivalent). SKIN PROTECTION: Where skin contact can occur, wear nitrile gloves. SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES Form: Paste Appearance/Color: Yellow,dries clear Odor: Mild Solubility (in water): Slightly pH Value: Not Available Boiling Range/Point: Not available Evaporation Rate: Slower than n-Butyl Acetate % Volatile: 0.% Specific Gravity: 1.05 VOC: 11 g/l SECTION 10 - STABILITY AND REACTIVITY Stability: This product is stable Hazardous Polymerization: Hazardous polymerization will not occur CONDITIONS TO AVOID: Heat and open flames. Water or damp air. Product cures in the presence of moisture. INCOMPATIBLITY: Avoid contact with acids and oxidizers HAZARDOUS DECOMPOSITION PRODUCTS: Oxides of carbon and inorganic compounds SECTION 11 - TOXICOLOGICAL INFORMATION This formulation has not been tested for toxicological effects. Acute and chronic health effects are not expected as long as good industrial hygeine and safety precautions are followed. SECTION 12 - ECOLOGICAL INFORMATION This formulation has not been tested for environmental effects. SECTION 13 - DISPOSAL CONSIDERATIONS WASTE DISPOSAL: Disposal of this product must comply with all applicable federal, state and local regulations. CONTAINER DISPOSAL: Disposal of this container should comply with all applicable federal, state and local regulations. SECTION 14 - TRANSPORT INFORMATION UN Number None UN Pack Group N/A UN Class Nonhaz ICAO/IATA Class Nonhazardous IMDG Class Nonhazardous Shipping Name Nonhazardous Packaging may not be approved for shipping by air. Please contact Franklin International for further information. SECTION 15 - REGULATORY INFORMATION TSCA (Toxic Substances Control Act Inventory): All components of this product are listed on the TSCA inventory except as exempted. SECTION 16 - OTHER INFORMATION DISCLAIMER: While the information and recommendations set forth herein are believed to be accurate as of the data hereof, Franklin International makes no warranty, express or implied, with respect thereto and disclaims all liability from reliance thereon.